|
FEATURES:
1. Low disspipation factor and high
insulation resistance.
2. High stability of capacitance and DF versus temperature
and frequency Non-inductive construction and self-healing
property.
3. Flame retardant epoxy resin coating.
GENERAL TECHNICAL
DATA
Dielectric:
Polyesters film.
Plates:
Aluminium layer deposited by evaporation under vacuum.
Winding:
Non-inductive type.
Leads:
Tinned wire.
Marking:
Capacitance, tolerance, D.C. rated voltage
Operating temperature range:
-40 to +85 oC
ELECTRICAL
CHARACTERISTICS
Rated voltage(Vr):
100Vdc~250Vdc~400Vdc~630Vdc
Capacitance range:
1000pF to 10uF
Capacitance values:
E6 series(IEC 63 Norm).
Capacitance tolerances (measured at 1kHz)
±5%(J); ±10%(K);±20%(M)
Total self-inductance(L)
(Lead length~2mm)
|
L.S.(mm)
|
15
|
20
|
27.5
|
|
L(nH)=
|
10
|
18
|
18
|
Dissipation factor(DF):
At +25 oC±5 oC
|
KHz
|
C≒0.1uF
|
>1uF
|
|
1
10
|
≒1%
≒1.5%
|
≒1%
|
|
Insulation resistance:
Test conditions
Temperature:+25 oC±5 oC
Voltage charge time: 1min
Voltage charge: 100Vdc
Performance
≡3℅104M次.uF for C≒0.33uF; ≡1℅104M次.uF
for C>0.33uF
TEST METHOD AND PERFORMANCE
Test conditions
Temperature: +40≡3℅4104M次±2≡3℅4104M次
Relative humidity(RH): 93%±2%
Test duration: 21 days
Performance
Capacitance change(→C/C): ≒±5%
DF change (→DF): ≒3% at 1KHz
Insulation resistance: ≡50% of initial limit
Endurance:
Test conditions
Temperature: +85oC±2oC
Test duration: 1000h
Voltage applied: 1.25 x Vr
Capacitance change (→C/C): ≒±5%
DF change(DF): ≒5% at 10KHz for C≒1uF
≒3% at 1KHz for Cˇ1uF
Insulation resistance: ≡50% of initial limit
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260oC±5oC
Dipping time (with heat screen): 5s±1s
performance
Capacitance change(→C/C): ≒±2% of the initial value
Appearance: no damage and good tinning
Long term stability (after two years):
Storage: standard environmental
Performance: capacitance change(→C/C): ≒3%
|
