|
Item |
Description |
|
MPE |
MPP |
PPN |
PEN |
PEI |
PS |
|
Capacitance Drift |
Cycles trough the operating
temperature range. |
|
2% MAX |
2% MAX |
2% MAX |
2% MAX |
2% MAX |
0.5% MAX |
|
Humidity Test |
It will withstand a test of R.H. 95%
at 40 o C for 240 hrs. |
C ≦5%
DF<1.2%
IR>5000MΩ |
C ≦5%
DF<0.1%
IR>10000MΩ |
C ≦3%
DF<0.1%
IR>10000MΩ |
C ≦3%
DF<1.2%
IR>10000MΩ |
C ≦3%
DF<1.2%
IR>10000MΩ |
C ≦2%
DF<0.15%
IR>50000MΩ |
|
Load Life Test |
It will withstand a testing voltage of
140% of R.V. for 1000hrs at 85 ?/span>C. (70?/span>C
PS) |
C ≦5%
DF<1.2%
IR>5000MΩ |
C ≦5%
DF<0.2%
IR>5000MΩ |
C ≦5%
DF<0.2%
IR>5000MΩ |
C ≦5%
DF<1.2%
IR>5000MΩ |
C ≦5%
DF<1.2%
IR>5000MΩ |
C ≦2%
DF<0.15%
IR>50000MΩ |
|
Lead Pull Test |
It will withstand a pull of 1.5kg
applied axially for 10 seconds. |
|
Lead Bend Test |
It will sustain two cycles without
breaking when attaching a load of 0.5kg to the end of the lead and
than rotating the capacitor 90 degree from the direction of lead
egress than 180 degree in opposite direction, then back to the
starting point. |
|
Solderability |
The lead shall be immersed in molten
solder (230 ?5?/span>C) for 2 ?5?/span>C
sec. At the completion of the test, the wound lead and gap in the
wound lead will be covered and filled by solder. And it is difficult
for taking the wound leads apart by finger to turn it. |
|
Dielectric Strength |
Shall withstand 200% or 160% of rated
voltage at 25?/span>C for 1 minute with current
limiting resistance of 1 Ω/V. |
